Nozzle Clear is available now!
Sprayers of all kinds suffer from the same problem – they clog!
Hard water scale, chemical residue, improper storage – whatever the reason, it’s never a good time when your valuable new sprayer is clogging.
Our specially formulated Nozzle Clear solution breaks up nozzle blockages and provides ongoing protection of your sprayer investment.
- One 2-liter bottle of Nozzle Clear.
- Works on all kinds of sprayers, misters and foggers.
- Removes clogs and prevents them from returning.
The unfortunate truth is that nozzles clog, no matter what you’re using. Soapy water, paint, sanitizing chemicals – whatever the fluid in question, repeated spraying inevitably leads to buildup. Before you give up or go out to buy more nozzles, though, we’ve got some good news. There’s an easy solution to clearing spray nozzle tips.
Clear clogs to save money
Everyone in the business of electrostatic sprayers knows that the nozzle can be a pain point. Basic maintenance calls for running fresh water through the system for 1 minute after every use, but the reality is that doesn’t always happen. An operator may forget, or the work may be so demanding that there is no time for maintenance steps. Regardless of the reason, there are now a whole lot of clogged sprayer nozzle tips out there.
Once a clog is established, rinsing with water often isn’t enough to clear it. What’s more, trying to clear it with force is likely to damage the machine or expose the operator to safety risks. Frustrated customers have even resorted to buying replacement nozzles for relatively new machines. At EnviroPro Solutions, we hated seeing our customers go through this experience. We started looking for a better way.
That’s how Nozzle Clear came to be.
Keep every machine running like clockwork
Whether an operation has one sprayer or 20, keeping every nozzle tip working is easy with Nozzle Clear. Not only does it break up clogs, but it also prevents them from forming in the first place.
Here’s how it works:
- To clear a spray nozzle tip that is already clogged:
- Completely submerge the nozzle in undiluted Nozzle Clear.
- Let nozzle soak over-night.
- To prevent spray nozzle tip clogs from forming, after every sprayer use:
- Dilute Nozzle Clear at a ratio of 2 oz. per gallon of fresh water.
- Fill sprayer tank with solution.
- Run solution through sprayer for one minute.
- Drain remaining solution from tank and store for subsequent use.
And that is all there is to it. No additional rinsing, no complicated prep or storage requirements.
Get more out of your investment
When an organization has made the wise decision to invest in a high-quality sprayer, they deserve as much mileage as they can get out of their investment. By using Nozzle Clear with electrostatic and airless spray nozzle tips, the life of these powerful machines is extended. Not to mention operators are spared the headache and hassle of troubleshooting clogs.
If you’re trying to fix your own clogging problem, you can pick up your own bottle of nozzle clear in our shop. And don’t hesitate to reach out at [email protected] if you have any questions.